In June 2024, our company shipped a 200-meter-long and 1200-mm-wide patterned conveyor belt to a sand field for the transportation and delivery of sand.

  Patterned conveyor belt is an angle conveyor belt composed of patterned covering rubber on the working surface and flat covering rubber on the non-working surface and belt core.

  It is often used to carry large objects and transport them diagonally, and it plays a role in increasing friction and anti-skid effect. It is a high-tech product with high strength, wear resistance, tear resistance, aging resistance, cold and heat resistance, and light weight. It is widely used in the field of industrial production.

  There is a human pattern on the belt surface that is higher than the belt body. 

The pattern can be open or closed. Each pattern can be divided into three types: high, medium, and low. It is usually suitable for conveying materials with an inclination of 0 to 40 degrees to prevent materials from sliding down.

  The processing methods of recycled materials of patterned conveyor belt could be choose different solutions according to specific situations. The following are some common dealing methods.

  1. Recycling and reuse: The recycled materials are cleaned, crushed, screened, etc., they can be reuse for producing new pattern conveyor belt or other rubber products. This method could minimize reduce the resource waste and improve economic benefits.

  2. Energy recycling: The recycled materials are able to be recycled for energy and converted into heat or electricity by incineration. This method has a certain significance for solving the energy supply problem. But, need to pay attention to environmental protection and waste gas treatment.

  3. Environmentally friendly landfill: If recycled materials can not be recycled or recycled for energy, could choose the environmentally landfill way for themselves, during the landfill period, need to take measure to prevent pollution of soil and groundwater to ensure the compliance management of landfills.

  4. Waster conversion and utilization: The recycled materials are used as raw materials for the production of other products, such as building materials, road paving materials materials, etc. This kind of method could convert the waster into resource to realize the resource recycling.

  5. Cooperative treatment: To cooperate with the professional waste dealing company and hand over the recycled materials to them for solving. These companies generally with professional equipment and technologies could deal with the recycled materials effectively, and ensure to meet some relevant environment standards.

  Whatever choose which solve methods have been selected, should followed the local environmental protection regulation to make sure that the treatment process will not have a negative impact on the environment and human health.

  Meanwhile, enterprises should pay attention to reduce the generation of waste materials, to improve the production efficiency, to reduce the amount of recycled materials generated from source.